T6817 - ATMEL Corporation

T6817 Dual Triple DMOS Output Driver

By means of the PC-controlled development board, a user can adapt the loads (see Figure 2-2 on page 3) easily via row connector pins. The design software interface controls the development board. Rev. 4783B–AUTO–11/05 2.2 Features • Row connector pins for external loads switched by low- or high-side drivers • Easy adaptation of loads directly on the T681.

Features

• Row connector pins for external loads switched by low- or high-side drivers
• Easy adaptation of loads directly on the T6817 application board
• Direct switch of loads to VS or GND
• Forward/reverse rotation of DC motors by full-bridge application
• Paralleling of outputs for powerful applications
• PC adaptation via standard SUB-D connectors (plug 3 or plug 4, see Figure 2-2 on page 3)
• PC-controlled functions via software user interface
• 5-V power supply on-board, activable by jumper J7, J8
• Signaling output state by LED, activable by J1 to J6 Figure 2-1. Block Diagram HS3 12 HS2 14 H.