Pin No. 1 Name ST/OE Input Pin Description Standby or Output Enable pin for OUT+ and OUT-. OE: When High or Open : OUT+ and OUT- = active When Low : OUT+ and OUT- = High Impedance state ST: When High or Open : OUT+ and OUT- = active When Low : OUT+ and OUT- = Output is low (weak pull down), oscillation stops Do Not connect pin, leave it floating. VDD power s.
• Extremely low RMS phase jitter (random)
• <1 ps (typical)
• Wide frequency range
• 1 MHz to 220 MHz
• 220 MHz to 800 MHz refer to SiT9107
• High frequency stability
• ±10 PPM, ±15 PPM, ±20 PPM
• ±25 PPM, ±50 PPM
• Operating voltage
• 1.8, 2.5 or 3.3 V
• Other voltages up to 3.63 V (contact SiTime)
• Operating temperature range
• Industrial, -40 to 85 °C
• Extended Commercial, -20 to 70 °C
• Commercial, 0 to 70 °C
• Small footprint
• 5.0 x 3.2 x 0.75 mm
• 7.0 x 5.0 x 0.90 mm
• Pb-free and RoHS compliant
• For Spread Spectrum see SiT9002
• Ultra-reliable start up and greater immunity from inte.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SiT9120 |
SiTime |
Standard Frequency Differential Oscillator | |
2 | SiT9121 |
SiTime |
1-220 MHz High Performance Differential Oscillator | |
3 | SiT9122 |
SiTime |
220-625 MHz High Performance Differential Oscillator | |
4 | SiT9156 |
SiTime |
LVDS Oscillator | |
5 | SiT9001 |
SiTime |
High Performance Spread Spectrum Oscillator | |
6 | SiT9002 |
SiTime |
1 to 220 MHz High Performance Spread Spectrum Oscillator | |
7 | SiT9003 |
SiTime |
Low Power Spread Spectrum Oscillator | |
8 | SiT9005 |
SiTime |
1 to 141 MHz EMI Reduction Oscillator | |
9 | SiT9025 |
SiTime |
1 to 150 MHz EMI Reduction Oscillator | |
10 | SiT9045 |
SiTime |
EMI Reduction Oscillator | |
11 | SiT9201 |
SiTime |
One-Output Clock Generator | |
12 | SiT9346 |
SiTime |
Ultra-low Jitter Differential Oscillator |