SPECIFICATIONS STK443-090 1999.08.09 1. Case Outline 18Pins (See attached outline drawing) 2. Function class AB 3 channels AF power amplifier 3. Application 50W audio use 4. Maximum Ratings / Ta 25°C Item Symbol Conditions Power Supply Voltage 1 Vcc max(1) No signal Power Supply Voltage 2 Thermal Resistance Vcc max(2) Signal ,R L=8Ω ,6Ω j-c Per.
Output Noise Voltage Quiescent Current Output Neutral Voltage
*3 VNO ICCO
VN
±42 ±42 ±42
Rg=2.2 kΩ
1.0 mVrms 120 mA
-70 0 +70 mV
Specifications and information herein are subject to change without notice.
Note
*1.1ch Drive
*2.All tests are measured using a constant-voltage supply unless otherwise specified.
*3.The output noise voltage is peak value of an average-reading meter with a rms value scale(VTVM). A regulated AC supply(50Hz) should be used to eliminate the effects of AC primary line flicker noise.
*4.Available time for load short-circuit and output noise voltage are measured u.
Equivalent Block Diagram (STK443-090) 9 TR1 D2 TR2 R3 TR6 R8 C4 C1 10 TR3 11 TR4 R4 R5 TR8 C10 TR9 TR10 TR5.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | STK443-xxx |
ETC |
(STK4xx) 2-Channel 5 to 25W AF Power Amp | |
2 | STK443 |
Sanyo |
2 Channel 5 to 25W Min AF Power AMP | |
3 | STK443 |
Sanyo |
Single Power Supply / 2Ch Amplifier | |
4 | STK4432 |
Sanyo |
AF Power Amplifier (25W + 25W min / THD = 1.0%) | |
5 | STK441 |
Sanyo |
20W MIN 2 CHANNEL AF POWER AMPLIFIER | |
6 | STK441 |
Sanyo |
Single Power Supply / 2Ch Amplifier | |
7 | STK441-xxx |
ETC |
(STK4xx) 2-Channel 5 to 25W AF Power Amp | |
8 | STK4412 |
Sanyo Semicon Device |
2-Channel AF Power Amplifier | |
9 | STK442-090 |
SANYO |
Function class AB 2 channels AF power amplifier | |
10 | STK442-110 |
Sanyo |
14 Pin / Class AB 2 Channels AF Power Amplifier | |
11 | STK442-130 |
ETC |
AF Power Amplifier | |
12 | STK400 |
SamHop Microelectronics |
N-Channel MOSFET |