ST7533 - Sitronix Technology

ST7533 33 x 96 Dot Matrix LCD Controller/Driver

The ST7533 is a single-chip dot matrix LCD drivers that can be connected directly to a microprocessor bus. 8-bit parallel or serial display data sent from the microprocessor is stored in the internal display data RAM and the chip generates a LCD drive signal independent of the microprocessor. Because the chips in the ST7533 contain 33x96 bits of display data.

Features

Direct display of RAM data through the display data RAM. RAM capacity : 33 x 96 = 3168 bits Display duty selectable by select pin 1/33 duty : 33 common x 96 segment 1/17 duty : 17 common x 96 segment High-speed 8-bit MPU interface (The chip can be connected directly to the both the 80x86 series MPUs and the 68000 series MPUs) /Serial interfaces are supported. Abundant command functions Display data Read/Write, display ON/OFF, Normal/ Reverse display mode, page address set, display start line set, column address set, status read, display all points ON/OFF, LCD bias set, electronic volume, read/.