The ST2226A is a LED driver incorporating shift registers, data latches, 16-channel constant current circuitry with current value set by an external resistor, 1024 gray level PWM (Pulse Width Modulation) functional unit and time division capability. Each channel can provide a maximum current of 60 mA. Time division operation allows driving up to 1 or 2 LEDs .
˙ ˙ ˙ ˙ ˙ ˙ Constant current outputs with current value settings by an external resistor Maximum output current: 60 mA Time division output allows the driving of 1 or 2 LEDs with a single output Maximum / minimum output voltage: 10V / 1.25V 10 bits luminance data with PWM current outputs Serial shift-in architecture for luminance data in time division Mode 1 and Mode 2 Absolute Maximum Ratings Supply Voltage (AVDD, DVDD) Input Voltage Range (VIN) Driver Output Voltage Range (VOUT) Driver Output Current (IOUT) Power Dissipation (Ta = 50 ℃or less) Thermal Resistance (Θja) Operating temperature .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ST2226B |
SiTI |
PWM-Controlled Constant Current Driver | |
2 | ST2221A |
SiTI |
8-Bit CONSTANT CURRENT LED DRIVERS | |
3 | ST2221C |
SiTI |
16-Bit Constant Current LED Drivers | |
4 | ST2225A |
ETC |
LED DISPLAY DRIVER | |
5 | ST220-100T4MI |
Vishay |
Wet Tantalum Capacitors | |
6 | ST220-50T2MI |
Vishay |
Wet Tantalum Capacitors | |
7 | ST2202 |
ETC |
8 BIT Integrated Microcontroller with 256K Bytes ROM | |
8 | ST223C |
International Rectifier |
INVERTER GRADE THYRISTORS Hockey Puk Version | |
9 | ST223S |
International Rectifier |
INVERTER GRADE THYRISTORS Stud Version | |
10 | ST2244 |
Pletronics |
(ST2244 / ST2245) ST2000 Series Crystal Oscillator | |
11 | ST2245 |
Pletronics |
(ST2244 / ST2245) ST2000 Series Crystal Oscillator | |
12 | ST22FJ1M |
STMicroelectronics |
Smartcard 32-Bit RISC MCU |