The ST16C5801 is a universal asynchronous receiver and transmitter (UART) and is pin compatible with the ST16C550 UART. The 580 is an enhanced UART with 16 byte FIFO’s, automatic hardware/software flow control, and data rates up to 1.5Mbps. Onboard status registers provide the user with error indications and operational status. Modem interface control is inc.
• Pin to pin and functionally compatible to the Industry Standard 16550
• 2.97 to 5.5 volt operation
• 1.5 Mbps transmit/receive operation (24MHz)
• 16 byte transmit FIFO
• 16 byte receive FIFO with error flags
• Automatic hardware/software flow control
• Programmable Xon/Xoff characters
• Independent transmit and receive control
• Software selectable Baud Rate Generator prescaleable clock rates of 1X or 4X
• Four selectable transmit/receive FIFO interrupt trigger levels
• Standard modem interface or Infrared IrDA encode/ decoder interface
• Sleep mode ( 200µA stand-by )
• Low operating curren.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | ST16C550 |
Exar Corporation |
UART WITH 16-BYTE FIFO | |
2 | ST16C552 |
Exar Corporation |
DUAL UART WITH 16-BYTE FIFO AND PARALLEL PRINTER PORT | |
3 | ST16C552A |
Exar Corporation |
DUAL UART WITH 16-BYTE FIFO AND PARALLEL PRINTER PORT | |
4 | ST16C554 |
MaxLinear |
2.97V to 5.5V Quad UART | |
5 | ST16C554 |
Exar Corporation |
QUAD UART WITH 16-BYTE FIFOS | |
6 | ST16C554D |
MaxLinear |
2.97V to 5.5V Quad UART | |
7 | ST16C554D |
Exar Corporation |
2.97V TO 5.5V QUAD UART | |
8 | ST16C1450 |
Exar Corporation |
(ST16C1450 / ST16C1451) 2.97V TO 5.5V UART | |
9 | ST16C1451 |
Exar Corporation |
(ST16C1450 / ST16C1451) 2.97V TO 5.5V UART | |
10 | ST16C1550 |
Exar Corporation |
(ST16C1550 / ST16C1551) 2.97V TO 5.5V UART WITH 16-BYTE FIFO | |
11 | ST16C1551 |
Exar Corporation |
(ST16C1550 / ST16C1551) 2.97V TO 5.5V UART WITH 16-BYTE FIFO | |
12 | ST16C2450 |
STARTECH |
DUAL UNIVERSAL ASYNCHRONOUSRECEIVER/TRANSMITTER |