The MCP79410 is an I2C slave device. SDA is a bidirectional pin used to transfer data in and out of the device. It is an open-drain terminal, therefore, the SDA bus requires a pull-up resistor to VCC (typically 10 kΩ for 100 kHz and 2 kΩ for 400 kHz). For normal data transfers, SDA is allowed to change only during SCL low. Changes during SCL high are reserve.
OF THE RTCC
• I2C™ Bus Interface
• RTCC with Time/Date Registers: Year, Month, Date, Day of Week, Hours, Minutes, Seconds
• Support for Leap Year
• Low-power CMOS Technology
• Input for External Battery Backup (maintains SRAM, RTCC and timekeeping)
• On-board 32,768 kHz Crystal Oscillator for the RTCC
SCHEMATIC
The schematic includes a PIC18 Explorer demo board and the I2C RTCC PICtail™ daughter board as shown in Figure 1.
FIGURE 1:
SCHEMATIC
DB7 - 0
LCD LUMEX
RS E SCK
MCP23S17
SPI Expander
CS SDI
VDD RC5/SD01 C4 = 0.1 uF RA2 10K S1 RB0 VDD VDD 2K RA4/T0 CKI
C3
32.768 kHz
1 X1
10pF .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SSR-25LA |
ANV |
SSR Series SOLID STATE RELAY | |
2 | SSR-250DA-H |
Fotek |
DC to AC Solid State Relay | |
3 | SSR-25AA |
ANV |
SSR Series SOLID STATE RELAY | |
4 | SSR-25AA-H |
ANV |
SSR Series SOLID STATE RELAY | |
5 | SSR-25DA |
Fotek |
DC to AC Solid State Relay | |
6 | SSR-25DA-H |
ANV |
SSR Series SOLID STATE RELAY | |
7 | SSR-25VA |
ANV |
SSR Series SOLID STATE RELAY | |
8 | SSR-25VA-H |
ANV |
SSR Series SOLID STATE RELAY | |
9 | SSR-20DD |
FUZHOU CANWELL |
General Solid State Relay | |
10 | SSR-240A25 |
TE |
Solid State Relay | |
11 | SSR-240A50 |
TE |
Solid State Relay | |
12 | SSR-240D25 |
TE |
Solid State Relay |