The SSL3252 is a photo flash LED driver designed for battery operated mobile devices such as mobile phones and PDAs. The boost converter delivers high performance and drives a single or dual high brightness LED at up to 500 mA with over 85 % efficiency. The driver can be programmed to operate in Flash mode, Torch mode, Assist light mode, or Indicator mode. T.
High power single or dual LED output driving up to 500 mA flash current
Separate indicator LED output of 2.5 mA to 10 mA
High side current source for main and indicator LEDs
Output voltage of up to 8.85 V
Wide input voltage ranging from 2.5 V to 5.5 V
High efficiency of over 85 % at optimum output current
Switching frequency of 2 MHz
Flash mode, Assist light mode, Torch mode and Indicator mode are supported
Internally timed flash operation up to 850 ms
I2C-bus, programmable up to 400 kHz
Strobe signal to avoid I2C latency for the flash
Direct enable signals for stand-al.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SSL32 |
Taiwan Semiconductor |
Surface Mount Schottky Barrier Rectifier | |
2 | SSL32 |
MIC |
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER | |
3 | SSL32 |
LGE |
Surface Mount Schottky Barrier Rectifiers | |
4 | SSL32 |
TAYCHIPST |
Surface Mount Schottk Barrier Rectifier | |
5 | SSL30 |
Rectron Semiconductor |
LOW Vf SCHOTTKY BARRIER RECTIFIER | |
6 | SSL30L |
Rectron Semiconductor |
LOW Vf SCHOTTKY BARRIER RECTIFIER | |
7 | SSL310B |
Jingdao |
Surface Mount Schottky Barrier Rectifier | |
8 | SSL310C |
Jingdao |
Surface Mount Schottky Barrier Rectifier | |
9 | SSL33 |
Taiwan Semiconductor |
Surface Mount Schottky Barrier Rectifier | |
10 | SSL33 |
MIC |
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER | |
11 | SSL33 |
LGE |
Surface Mount Schottky Barrier Rectifiers | |
12 | SSL33 |
TAYCHIPST |
Surface Mount Schottk Barrier Rectifier |