SPSB100BTR Tape and reel SPSB100PTR System supply configuration 1 System supply configuration 2 • AEC-Q100 qualified • 2 configurable (6.5 V, 5 V, 3.3 V) BUCK converters and typ peak switching current limit of 3.0 A at 2.4 MHz or 400 kHz • 1 configurable (3.3 V, 1.25 V, 1.2 V, 1.1 V, 0.98 V) BUCK converter and typ peak switching current limit up to 6.0 A .
VFQFN56 + 4L 8x8x0.9 mm
Product status link SPSB100
Product summary
Order code Packing Description
SPSB100BTR
Tape and reel
SPSB100PTR
System supply configuration
1
System supply configuration
2
• AEC-Q100 qualified
• 2 configurable (6.5 V, 5 V, 3.3 V) BUCK converters and typ peak switching
current limit of 3.0 A at 2.4 MHz or 400 kHz
• 1 configurable (3.3 V, 1.25 V, 1.2 V, 1.1 V, 0.98 V) BUCK converter and typ
peak switching current limit up to 6.0 A at 2.4 MHz, with fine-tuning configurability around 0.98 V (0.95 V to 1.01 V)
• Overcurrent detection and limitation for all BUCKs
• Inte.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SPSB081 |
STMicroelectronics |
Automotive power management | |
2 | SPS-103 |
Sanyo |
Phototransistor Typical Characteristics | |
3 | SPS-1616 |
IDT |
Secure Packet Switch | |
4 | SPS-40x |
RPM Micro |
High Voltage Rectifiers | |
5 | SPS-421 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
6 | SPS-422 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
7 | SPS-423 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
8 | SPS-424 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
9 | SPS-425 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
10 | SPS-426 |
Sanyo Electric |
(SPS-4xx) IR Receiver PreAmp Module | |
11 | SPS-440 |
Sanyo |
Receiver Pre-Amp Module | |
12 | SPS-440-1 |
Sanyo |
Receiver Pre-Amp Module |