The SP9602 is a low power, dual 12–Bit Digital-to-Analog Converter. It features +4.5V output swings when using +5 volt supplies. The converter is double-buffered for easy microprocessor interface. Each 12–Bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The output settling-time is specified at .
+4.5V output swings when using +5 volt supplies. The converter is double-buffered for easy microprocessor interface. Each 12
–Bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The output settling-time is specified at 30µs. The SP9602 is available in 28
–pin SOIC and plastic DIP packages, specified over commercial temperature range.
Ref In 1 INPUT REGISTERS DATA INPUTS 8 MSB's 4 LSB's LATCH LATCH DAC LATCH DAC REGISTERS
– LATCH DAC + VOUT1 Ref In 2
– + VOUT2
CONTROL LOGIC
A
CS
WR1 B1/B2 WR2 XFER CLR
SP9602DS/02
SP9602 Dual, 12.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP9600 |
Sipex |
12-Bit / Low Power Voltage Output D/A Converter | |
2 | SP9601 |
Sipex |
12-Bit / Low Power Voltage Output D/A Converter | |
3 | SP9604 |
Sipex |
Quad / 12-Bit / Low Power Voltage Output D/A Converter | |
4 | SP9680 |
Plessey |
Ultra Fast Comparator | |
5 | SP9685 |
Plessey Semiconductors |
Ultra Fast Comparator | |
6 | SP9685AC |
Plessey Semiconductors |
Ultra Fast Comparator | |
7 | SP9687 |
Plessey Semiconductors |
Ultra Fast Comparator | |
8 | SP9687AC |
Plessey Semiconductors |
Ultra Fast Comparator | |
9 | SP903 |
SIPAT |
DECT RF Filters | |
10 | SP915 |
SIPAT |
DECT RF Filters | |
11 | SP916 |
ETC |
Service Manual | |
12 | SP927 |
SIPAT |
DECT RF Filters |