The SP339 is an advanced multiprotocol transceiver supporting RS-232, RS-485, and RS-422 serial standards in a 40 pin QFN package. Integrated cable termination and four configuration modes allow all three protocols to be used interchangeably over a single cable or connector with no additional switching components. Full operation requires only four external c.
Pin selectable Cable Termination
No external resistors required for RS-485/422
termination and biasing
3.3V or 5V Single Supply Operation
Robust ESD Protection on bus pins
■ ±15kV IEC 61000-4-2 (Air Gap)
■ ± 8kV IEC 61000-4-2 (Contact)
■ ±15kV Human Body Model (HBM)
Max Data Rate of 20Mbps in RS-485/422 Modes
and up to 1Mbps in RS-232 Modes
Pin selectable 250kbps Slew Limiting
3 Drivers, 5 Receivers RS-232/V.28
1 Driver, 1 Receiver RS-485/422
■ Full and Half Duplex Configuration
■ 1/8th Unit Load, up to 256 receivers on bus
RS-485/422 Enhanced Failsafe for open, shorted,
or .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SP339B |
MaxLinear |
RS-232/RS-485/RS-422 TRANSCEIVER | |
2 | SP339B |
EXAR |
RS-232/RS-485/RS-422 TRANSCEIVER | |
3 | SP3304NUTG |
Leiditech |
4-Line 3.3V ESD Protection Diode Array | |
4 | SP330E |
MaxLinear |
RS-232/RS-485/RS-422 TRANSCEIVER | |
5 | SP330E |
EXAR |
RS-232/RS-485/RS-422 TRANSCEIVER | |
6 | SP331 |
MaxLinear |
Programmable Dual RS-232/RS-485 Transceiver | |
7 | SP331 |
EXAR |
Programmable Dual RS-232/RS-485 Transceiver | |
8 | SP331 |
Sipex |
Programmable RS-232/RS-485 Transceiver | |
9 | SP3312T |
Littelfuse |
3.3V 15A Diode Array | |
10 | SP3313 |
Segma Power |
100% Duty Cycle CC&CV Buck Convertor | |
11 | SP332 |
MaxLinear |
RS-232/RS-485 Transceiver | |
12 | SP332 |
EXAR |
RS-232/RS-485 Multi-mode SerialTransceiver |