These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements. The devices allow data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (O.
•1 Wide Operating Voltage Range of 2 V to 6 V
• High-Current 3-State Outputs Drive Bus Lines
Directly or Up to 15 LSTTL Loads
• Low Power Consumption, 80-μA Max ICC
• Typical tpd = 12 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 μA Max
• On Products Compliant to MIL-PRF-38535,
All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
2 Applications
• Servers
• PCs and Notebooks
• Network Switches
• Wearable Health and Fitness Devices
• Telecom Infrastructures
• Electronic Points of Sale
3 D.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SNJ54HC245W |
Texas Instruments |
Octal Bus Transceivers | |
2 | SNJ54HC240J |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVERS | |
3 | SNJ54HC240W |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVERS | |
4 | SNJ54HC257J |
Texas Instruments |
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
5 | SNJ54HC258J |
Texas Instruments |
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS | |
6 | SNJ54HC109FK |
Texas Instruments |
DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS | |
7 | SNJ54HC109J |
Texas Instruments |
DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS | |
8 | SNJ54HC109W |
Texas Instruments |
DUAL J-K POSITIVE-EDGE-TRIGGERED FLIP-FLOPS | |
9 | SNJ54HC10FK |
Texas Instruments |
TRIPLE 3-INPUT POSITIVE-NAND GATES | |
10 | SNJ54HC10J |
Texas Instruments |
TRIPLE 3-INPUT POSITIVE-NAND GATES | |
11 | SNJ54HC10W |
Texas Instruments |
TRIPLE 3-INPUT POSITIVE-NAND GATES | |
12 | SNJ54HC112FK |
Texas Instruments |
DUAL J-K NEGATIVE-EDGE-TRIGGERED FLIP-FLOPS |