ordering information The ’AHC373 devices are octal transparent D-type latches designed for 2-V to 5.5-V VCC operation. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs. A buffered output-enable (OE) input can be used to place the eight outputs in .
evels of the D inputs.
A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
ORDERING INFORMATION
TA
PACKAGE†
ORDERABLE PART NUMBER
TOP-SIDE MARKING
PDIP
– N
Tube
SN74AHC373N
SN74AHC373N
SOIC
– DW
Tube Tape and reel
SN74AHC373DW SN74AHC373DWR
AHC373
–40°C to 85°C
SOP
– .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SNJ54AHC373J |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE | |
2 | SNJ54AHC374J |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
3 | SNJ54AHC374W |
Texas Instruments |
Octal Edge-Triggered D-Type Flip-Flop | |
4 | SNJ54AHC32J |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-OR GATES | |
5 | SNJ54AHC32W |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-OR GATES | |
6 | SNJ54AHC367J |
Texas Instruments |
HEX BUFFERS AND LINE DRIVER | |
7 | SNJ54AHC367W |
Texas Instruments |
HEX BUFFERS AND LINE DRIVER | |
8 | SNJ54AHC00J |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NAND GATE | |
9 | SNJ54AHC02J |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATE | |
10 | SNJ54AHC02W |
Texas Instruments |
QUADRUPLE 2-INPUT POSITIVE-NOR GATE | |
11 | SNJ54AHC04J |
Texas Instruments |
HEX INVERTER | |
12 | SNJ54AHC04W |
Texas Instruments |
HEX INVERTER |