The SN65512C and SN75512C are monolithic BIDFET† integrated circuits designed to drive a dot matrix or segmented vacuum fluorescent display. All device inputs are diode-clamped pnp inputs and assume a high logic level when open circuited. The nominal input threshold is 1.5 V. Outputs are totem-pole structures formed by an npn emitter follower and double-diff.
registers. This output is not affected by LATCH ENABLE or STROBE. The SN65512C is characterized for operation from − 40°C to 85°C. The SN75512C is characterized for operation from 0°C to 70°C. SN65512C, SN75512C VACUUM FLUORESCENT DISPLAY DRIVERS ą SLDS054 − D3516, MAY 1990 DW OR N PACKAGE (TOP VIEW) Q11 Q12 STROBE SERIAL OUT DATA IN VCC1 CLOCK LATCH ENABLE Q1 Q2 1 2 3 4 5 6 7 8 9 10 20 Q10 19 Q9 18 Q8 17 Q7 16 VCC2 15 GND 14 Q6 13 Q5 12 Q4 11 Q3 logic symbol‡ 8 LATCH ENABLE 3 STROBE 7 CLOCK TTL / VAC FLUOR DISPLAY SRG12 C1/ 5 DATA IN 2D 3 2D 3 2D 3 2D 3 2D 3 2D 3 2D 3 2D 3 2D 3 2D 3.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75512B |
Texas Instruments |
Vacuum Fluorescent Display Drivers | |
2 | SN75518 |
Texas Instruments |
Vacuum Fluorescent Display Drivers | |
3 | SN75555 |
Texas Instruments |
Electroluminescent Column Drivers | |
4 | SN75556 |
Texas Instruments |
Electroluminescent Column Drivers | |
5 | SN755723FT |
ETC |
CMOS 40-Bit Anode/Grid Driver | |
6 | SN755864APZP |
ETC |
SN755864APZP | |
7 | SN755866PZP |
ETC |
SN755866PZP | |
8 | SN755870KPZT |
ETC |
Plasma Display Panel IC | |
9 | SN7500 |
KODENSHI |
Pulse Width Modulation | |
10 | SN7500P |
KODENSHI |
Pulse Width Modulation | |
11 | SN75061 |
Texas Instruments |
Driver-Receiver Pair | |
12 | SN75076B |
Texas Instruments |
Differential Bus Transceivers |