The SN55173, SN65173, and SN75173 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of TIA/EIA-422-B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two .
B, TIA/EIA-423-B, TIA/EIA-485-A, and several ITU recommendations. The standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. The four receivers share two OR enable inputs, one active when high, the other active when low. These devices feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ± 200 mV over a common-mode input voltage range of
– 12 V to 12 V. Fail-safe design specifies that if the inputs are open circuited, the outputs are always high. The SN65173 and SN75173 are designed for optimum performance w.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN75173 |
Motorola |
Quad EIA-485 Line Receivers | |
2 | SN75173 |
Texas Instruments |
QUADRUPLE DIFFERENTIAL LINE RECEIVERS | |
3 | SN751730 |
Texas Instruments |
Triple Line Driver/Receiver | |
4 | SN751730D |
Texas Instruments |
Triple Line Driver/Receiver | |
5 | SN751730N |
Texas Instruments |
Triple Line Driver/Receiver | |
6 | SN75173N |
Texas Instruments |
QUADRUPLE DIFFERENTIAL LINE RECEIVERS | |
7 | SN751701 |
Texas Instruments |
LINE DRIVER/RECEIVER | |
8 | SN75172 |
Texas Instruments |
QUADRUPLE DIFFRENTIAL LINE DRIVER | |
9 | SN75174 |
Texas Instruments |
QUADRUPLE DIFFERENTIAL LINE DRIVER | |
10 | SN75174N |
Texas Instruments |
QUADRUPLE DIFFERENTIAL LINE DRIVER | |
11 | SN75175 |
Motorola |
QUAD EIA-485 LINE RECEIVER | |
12 | SN75175 |
Motorola |
Quad EIA-485 Line Receivers |