The SN54LVCH245A octal bus transceiver is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVCH245A octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. Device Information(1) PART .
•1 Operate From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max tpd of 6.3 ns at 3.3 V
• Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
• Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C
• Support Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With 3.3-V VCC)
• Ioff Supports Live Insertion, Partial-Power-Down Mode, and Back-Drive Protection
• Bus Hold on Data Inputs Eliminates the Need for External Pullup or Pulldown Resistors
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Bo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74LVCH245A-Q1 |
Texas Instruments |
OCTAL BUS TRANSCEIVER | |
2 | SN74LVCH244A |
Texas Instruments |
OCTAL BUFFERS/DRIVERS | |
3 | SN74LVCH162244A |
Texas Instruments |
16-Bit Buffer/Driver | |
4 | SN74LVCH16240A |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
5 | SN74LVCH16244A |
Texas Instruments |
16-Bit Buffer/Driver | |
6 | SN74LVCH16245A |
Texas Instruments |
16-bit Bus Transceiver | |
7 | SN74LVCH16373A |
Texas Instruments |
16-Bit Transparent D-Type Latch | |
8 | SN74LVCH16374A |
Texas Instruments |
16-Bit Edge-Triggered D-Type Flip-Flop | |
9 | SN74LVCH16540A |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
10 | SN74LVCH16541A |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
11 | SN74LVCH16543A |
Texas Instruments |
16-BIT REGISTERED TRANSCEIVER | |
12 | SN74LVCH16646A |
Texas Instruments |
16-BIT BUS TRANSCEIVER/REGISTER |