ORDERING INFORMATION This octal bus transceiver and register is designed for 1.65-V to 3.6-V VCC operation. The SN74LVC2952A consists of two 8-bit back-to-back registers that store data flowing in both directions between two bidirectional buses. Data on the A or B bus is stored in the registers on the low-to-high transition of the clock (CLKAB or CLKBA) inpu.
• Operates From 1.65 V to 3.6 V
• Inputs Accept Voltages to 5.5 V
• Max tpd of 8.2 ns at 3.3 V
• Typical VOLP (Output Ground Bounce)
<0.8 V at VCC = 3.3 V, TA = 25°C
• Typical VOHV (Output VOH Undershoot)
>2 V at VCC = 3.3 V, TA = 25°C
• Supports Mixed-Mode Signal Operation on All
Ports (5-V Input/Output Voltage With 3.3-V VCC)
• Ioff Supports Partial-Power-Down Mode Operation
• Latch-Up Performance Exceeds 250 mA Per JESD 17
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 1000-V Charged-Device Model (C101)
SN74LVC2952A OCTAL BUS TRANSCEIVER AND REGISTER
WITH 3-STATE OUT.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74LVC2244A |
Texas Instruments |
Octal Buffer/Driver | |
2 | SN74LVC240A |
Texas Instruments |
Octal Buffer/Driver | |
3 | SN74LVC244A |
Texas Instruments |
Octal Buffer/Driver | |
4 | SN74LVC244A-Q1 |
Texas Instruments |
OCTAL BUFFER/DRIVER | |
5 | SN74LVC244AN |
Texas Instruments |
Octal Buffer/Driver | |
6 | SN74LVC245A |
Texas Instruments |
Octal Bus Transceiver | |
7 | SN74LVC245A-EP |
Texas Instruments |
OCTAL BUS TRANSCEIVER | |
8 | SN74LVC245AN |
Texas Instruments |
Octal Bus Transceiver | |
9 | SN74LVC257A |
Texas Instruments |
Quadruple 2-Line to 1-Line Data Selectors/Multiplexers | |
10 | SN74LVC257A-EP |
Texas Instruments |
QUADRUPLE 2-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER | |
11 | SN74LVC257A-Q1 |
Texas Instruments |
Automotive Quadruple 2-Line To 1-Line Data Selector/Multiplexer | |
12 | SN74LVC2G00 |
Texas Instruments |
Dual 2-Input Positive-NAND Gate |