These octal buffers and line drivers feature the performance of the popular ’HC240 series and offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state control gate is a 2-input NOR. If either output-enable (OE1 or OE2) input is high, all eight outputs are in the .
• Wide operating voltage range of 2 V to 6 V
• High-current 3-state outputs drive bus lines directly
or up to 15 LSTTL loads
• Low power consumption, 80-μA max ICC
• Typical tpd = 8 ns
• ±6-mA output drive at 5 V
• Low input current of 1 μA max
• Data flow-through pinout (all inputs on opposite
side from outputs)
2 Description
These octal buffers and line drivers feature the performance of the popular ’HC240 series and offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout.
The 3-state control gate is a 2-in.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74HC541 |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVER | |
2 | SN74HC541N |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVER | |
3 | SN74HC563 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE | |
4 | SN74HC573A |
Texas Instruments |
Octal Transparent D-Type Latche | |
5 | SN74HC573A-Q1 |
Texas Instruments |
Octal Transparent D-Type Latche | |
6 | SN74HC574 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
7 | SN74HC574N |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
8 | SN74HC590A |
Texas Instruments |
8-BIT BINARY COUNTER | |
9 | SN74HC594 |
Texas Instruments |
8-Bit Shift Register | |
10 | SN74HC595 |
Texas Instruments |
8-Bit Shift Registers | |
11 | SN74HC595-EP |
Texas Instruments |
8-Bit Shift Register | |
12 | SN74HC595B |
Texas Instruments |
8-Bit Shift Register |