ordering information The SN74CBT3245A provides eight bits of high-speed TTL-compatible bus switching. The SOIC, SSOP, TSSOP, and TVSOP packages provide a standard ’245 device pinout. The low on-state resistance of the switch allows connections to be made with minimal propagation delay. The device is organized as one 8-bit switch. When the output-enable (OE) .
ions to be made with minimal propagation delay. The device is organized as one 8-bit switch. When the output-enable (OE) input is low, the switch is on, and port A is connected to port B. When OE is high, the switch is open, and the high-impedance state exists between the two ports. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Please be aware that an important notice concerning availability, standard warranty, and use in crit.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74CBT3245C |
Texas Instruments |
8-BIT FET BUS SWITCH | |
2 | SN74CBT3244 |
Texas Instruments |
Octal FET Bus Switch | |
3 | SN74CBT3244C |
Texas Instruments |
8-BIT FET BUS SWITCH | |
4 | SN74CBT32245 |
Texas Instruments |
32-BIT FET BUS SWITCH | |
5 | SN74CBT3251 |
Texas Instruments |
1-of-8 FET Multiplexer/Demultiplexer | |
6 | SN74CBT3251D |
Texas Instruments |
1-of-8 FET Multiplexer/Demultiplexer | |
7 | SN74CBT3253 |
Texas Instruments |
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER | |
8 | SN74CBT3253C |
Texas Instruments |
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER | |
9 | SN74CBT3253CD |
Texas Instruments |
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER | |
10 | SN74CBT3253D |
Texas Instruments |
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER | |
11 | SN74CBT3253PW |
Texas Instruments |
DUAL 1-OF-4 FET MULTIPLEXER/DEMULTIPLEXER | |
12 | SN74CBT3257 |
Texas Instruments |
4-BIT 1-OF-2 FET MULTIPLEXER/DEMULTIPLEXER |