ORDERING INFORMATION This 16-bit (dual-octal) noninverting bus transceiver uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.4 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.4 V to 3.6 V. This allows for universal low-voltage bidirectional .
• Member of the Texas Instruments Widebus™ Family
• DOC™ Circuitry Dynamically Changes Output Impedance, Resulting in Noise Reduction Without Speed Degradation
• Dynamic Drive Capability Is Equivalent to Standard Outputs With IOH and IOL of ±24 mA at 2.5-V VCC
• Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
• If Either VCC Input Is at GND, Both Ports Are in the High-Impedance State
• Overvoltage-Tolerant Inputs/Outputs Allow Mixed-Voltage-Mode Data Communications
• Ioff Supports Partial-Power-Down Mode Operation
• Fully Configurable Dual-Rail Design Allows Each Port to Operate .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74AVCA164245 |
Texas Instruments |
16-BIT DUAL-SUPPLY BUS TRANSCEIVER | |
2 | SN74AVCA406 |
Texas Instruments |
ESD-PROTECTED VOLTAGE-TRANSLATION TRANSCEIVER | |
3 | SN74AVCA406E |
Texas Instruments |
MMC AND SD CARD VOLTAGE-TRANSLATION TRANSCEIVER | |
4 | SN74AVCA406L |
Texas Instruments |
VOLTAGE-TRANSLATION TRANSCEIVER | |
5 | SN74AVC16244 |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
6 | SN74AVC16245 |
Texas Instruments |
16-BIT BUS TRANSCEIVER | |
7 | SN74AVC16334 |
Texas Instruments |
16-BIT UNIVERSAL BUS DRIVER | |
8 | SN74AVC16373 |
Texas Instruments |
16-BIT TRANSPARENT D-TYPE LATCH | |
9 | SN74AVC16374 |
Texas Instruments |
16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
10 | SN74AVC16646 |
Texas Instruments |
16-BIT BUS TRANSCEIVER/REGISTER | |
11 | SN74AVC16722 |
Texas Instruments |
22-BIT FLIP-FLOP | |
12 | SN74AVC16827 |
Texas Instruments |
20-BIT BUFFER/DRIVER |