The SN74AVC16T245-Q1 is a 16-bit noninverting bus transceiver that uses two separate configurable power-supply rails. The SN74AVC16T245-Q1 is optimized to operate with VCCA or VCCB set at 1.4 V to 3.6 V. It is operational with VCCA or VCCB as low as 1.2 V. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port i.
•1 Qualified for Automotive Applications
• AEC-Q100 Qualified With the Following Results:
– Device Temperature Grade 1:
–40°C to 125°C Ambient Operating Temperature Range
– Device HBM ESD Classification Level H3B (JESD 22 A114-A)
– Device CDM ESD Classification Level C5 (JESD 22 C101)
• Control Inputs VIH/VIL Levels Are Referenced to VCCA Voltage
• VCC Isolation Feature
– If Either VCC Input is at GND, Both Ports Are in the High-Impedance State
• Fully Configurable Dual-Rail Design Allows Each Port to Operate Over the Full 1.2-V to 3.6-V Power-Supply Range
• Ioff Supports Partial-Power-Down Mo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74AVC16T245 |
Texas Instruments |
16-Bit Dual-Supply Bus Transceiver | |
2 | SN74AVC16244 |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
3 | SN74AVC16245 |
Texas Instruments |
16-BIT BUS TRANSCEIVER | |
4 | SN74AVC16334 |
Texas Instruments |
16-BIT UNIVERSAL BUS DRIVER | |
5 | SN74AVC16373 |
Texas Instruments |
16-BIT TRANSPARENT D-TYPE LATCH | |
6 | SN74AVC16374 |
Texas Instruments |
16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
7 | SN74AVC16646 |
Texas Instruments |
16-BIT BUS TRANSCEIVER/REGISTER | |
8 | SN74AVC16722 |
Texas Instruments |
22-BIT FLIP-FLOP | |
9 | SN74AVC16827 |
Texas Instruments |
20-BIT BUFFER/DRIVER | |
10 | SN74AVC16834 |
Texas Instruments |
18-BIT UNIVERSAL BUS DRIVER | |
11 | SN74AVC16835 |
Texas Instruments |
18-BIT UNIVERSAL BUS DRIVER | |
12 | SN74AVC1T45 |
Texas Instruments |
Single-Bit Dual-Supply Bus Transceiver |