ORDERING INFORMATION This quadruple bus buffer gate is designed for 0.8-V to 2.7-V VCC operation, but is designed specifically for 1.6-V to 1.95-V VCC operation. The SN74AUC125 contains four independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high. To ensure the high-impedance state during po.
• Optimized for 1.8-V Operation and Is 3.6-V I/O Tolerant to Support Mixed-Mode Signal Operation
• Ioff Supports Partial-Power-Down Mode Operation
• Sub-1-V Operable
• Max tpd of 2.1 ns at 1.8 V
• Low Power Consumption, 10-µA Max ICC
• ±8-mA Output Drive at 1.8 V
• Latch-Up Performance Exceeds 100 mA Per
JESD 78, Class II
• ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 200-V Machine Model (A115-A)
– 1500-V Charged-Device Model (C101)
GND 3Y
SN74AUC125 QUADRUPLE BUS BUFFER GATE
WITH 3-STATE OUTPUTS
SCES508A
– NOVEMBER 2003
– REVISED MARCH 2005
RGY PACKAGE (TOP VIEW)
1OE.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN74AUC126 |
Texas Instruments |
QUADRUPLE BUS BUFFER GATE | |
2 | SN74AUC14 |
Texas Instruments |
HEX SCHMITT-TRIGGER INVERTER | |
3 | SN74AUC16240 |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
4 | SN74AUC16244 |
Texas Instruments |
16-BIT BUFFER/DRIVER | |
5 | SN74AUC16245 |
Texas Instruments |
16-BIT BUS TRANSCEIVER | |
6 | SN74AUC16373 |
Texas Instruments |
16-BIT TRANSPARENT D-TYPE LATCH | |
7 | SN74AUC16374 |
Texas Instruments |
16-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
8 | SN74AUC17 |
Texas Instruments |
HEX SCHMITT-TRIGGER BUFFER | |
9 | SN74AUC1G00 |
Texas Instruments |
SINGLE 2-INPUT POSITIVE-NAND GATE | |
10 | SN74AUC1G02 |
Texas Instruments |
SINGLE 2-INPUT POSITIVE-NOR GATE | |
11 | SN74AUC1G04 |
Texas Instruments |
Single Inverter Gate | |
12 | SN74AUC1G06 |
Texas Instruments |
SINGLE INVERTER BUFFER/DRIVER |