The SN65LVDS116 is one differential line receiver connected to sixteen differential line drivers that implement the electrical characteristics of low-voltage differential signaling (LVDS). LVDS, as specified in EIA/TIA-644, is a data signaling technique that offers the low-power, low-noise coupling, and fast switching speeds to transmit data at relatively lo.
• One Receiver and Sixteen Line Drivers Meet or Exceed the Requirements of ANSI EIA/TIA-644 Standard
• Typical Data Signaling Rates to 400 Mbps or Clock Frequencies to 400 MHz
• Enabling Logic Allows Separate Control of Each Bank of Four Channels or 2-Bit Selection of Any One of the Four Banks
• Low-Voltage Differential Signaling With Typical Output Voltage of 350 mV and a 100-Ω Load
• Electrically Compatible With LVDS, PECL, LVPECL, LVTTL, LVCMOS, GTL, BTL, CTT, SSTL, or HSTL Outputs With External Termination Networks
• Propagation Delay Times < 4.7 ns
• Output Skew Is < 300 ps and Part-to-Pa.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN65LVDS117 |
Texas Instruments |
DUAL 4-PORT AND DUAL 8-PORT LVDS REPEATERS | |
2 | SN65LVDS1 |
Texas Instruments |
High-Speed Differential Line Drivers/Receivers | |
3 | SN65LVDS100 |
Texas Instruments |
Differential Translator/Repeater | |
4 | SN65LVDS101 |
Texas Instruments |
Differential Translator/Repeater | |
5 | SN65LVDS104 |
Texas Instruments |
4-Port LVDS and 4-Port TTL-to-LVDS Repeaters | |
6 | SN65LVDS105 |
Texas Instruments |
4-Port LVDS and 4-Port TTL-to-LVDS Repeaters | |
7 | SN65LVDS1050 |
Texas Instruments |
HIGH-SPEED DIFFERENTIAL LINE DRIVERS AND RECEIVERS | |
8 | SN65LVDS108 |
Texas Instruments |
8-PORT LVDS REPEATER | |
9 | SN65LVDS109 |
Texas Instruments |
DUAL 4-PORT AND DUAL 8-PORT LVDS REPEATERS | |
10 | SN65LVDS122 |
Texas Instruments |
LVDS CROSSPOINT SWITCH | |
11 | SN65LVDS125 |
Texas Instruments |
LVDS 4x4 CROSSPOINT SWITCH | |
12 | SN65LVDS125A |
Texas Instruments |
LVDS 4x4 CROSSPOINT SWITCH |