The SN65LVCP114 device is an asynchronous, protocol-agnostic, low-latency QUAD mux, linearredriver optimized for use in systems operating at up to 14.2 Gbps. The device linearly compensates for channel loss in backplane and active-cable applications. The architecture of SN65LVCP114 linear-redriver is designed to work effectively with ASIC or FPGA products im.
•1 Quad 2:1 Mux and 1:2 Demux
• Multi-Rate Operation up to 14.2 Gbps Serial Data
Rate
• Linear Receiver Equalization Which Increases
Margin at System Level of Decision Feedback Equalizer
• Bandwidth: 18 GHz, Typical
• Per-Lane P/N Pair Inversion
• Port or Single Lane Switching
• Low Power: 150 mW/Channel, Typical
• Loopback Mode on All Three Ports
• I2C Control in Addition to GPIO
• DIAG Mode That Outputs Data of Line Side Port to Both Fabric Side Ports
• 2.5-V or 3.3-V Single Power Supply
• PBGA Package 12-mm × 12-mm × 1-mm, 0.8-mm Terminal Pitch
• Excellent Impedance Matching to 100-Ω PCB Tr.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN65LVCP1412 |
Texas Instruments |
Dual Mode Linear Equalizer | |
2 | SN65LVCP1414 |
Texas Instruments |
Dual Mode Linear Equalizer | |
3 | SN65LVCP15 |
Texas Instruments |
Link Replicator | |
4 | SN65LVCP202 |
Texas Instruments |
Gigabit 2x2 CROSSPOINT SWITCH | |
5 | SN65LVCP204 |
Texas Instruments |
Gigabit 4x4 CROSSPOINT SWITCH | |
6 | SN65LVCP22 |
Texas Instruments |
2x2 LVDS CROSSPOINT SWITCH | |
7 | SN65LVCP23 |
Texas Instruments |
2x2 LVPECL CROSSPOINT SWITCH | |
8 | SN65LVCP40 |
Texas Instruments |
DC TO 4-GBPS DUAL 1:2 MULTIPLEXER/REPEATER/EQUALIZER | |
9 | SN65LVCP402 |
Texas Instruments |
Gigabit 2x2 CROSSPOINT SWITCH | |
10 | SN65LVCP404 |
Texas Instruments |
Gigabit 4x4 CROSSPOINT SWITCH | |
11 | SN65LVCP408 |
Texas Instruments |
Gigabit 8x8 CROSSPOINT SWITCH | |
12 | SN65LVCP418 |
Texas Instruments |
8-Channel Gigabit Signal Conditioning Buffer |