This CAN transceiver meets the ISO1189-2 High Speed CAN (Controller Area Network) physical layer standard. It is designed for data rates in excess of 2 Mpbs (megabits per second) for CAN FD (CAN with flexible data rate), greater than 1 Mbps for CAN in short networks, and enhanced timing margin and higher data rates in long and highly-loaded networks. The dev.
•1 Meets the Requirements of ISO11898-2
• Turbo CAN:
– Specified for 2-Mbps CAN FD (CAN with Flexible Data Rate)
– Short and Symmetrical Propagation Delay Times and Fast Loop Times for Enhanced Timing Margin
– Higher Data Rates in CAN Networks
• I/O Voltage Range Supports 3.3-V and 5-V MCUs
• Ideal Passive Behavior When Unpowered
– Bus and Logic Terminals are High Impedance (no load)
– Power-Up/Down With Glitch Free Operation On Bus
• Protection Features
– HBM ESD Protection Exceeds ±12 kV
– Bus Fault Protection
–27 V to 40 V
– Undervoltage Protection on Supply Terminals
– Driver Dominant Time.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN65HVD265 |
Texas Instruments |
Turbo CAN Transceivers | |
2 | SN65HVD266 |
Texas Instruments |
Turbo CAN Transceivers | |
3 | SN65HVD20 |
Texas Instruments |
Extended Common-Mode RS-485 Transceivers | |
4 | SN65HVD21 |
Texas Instruments |
Extended Common-Mode RS-485 Transceivers | |
5 | SN65HVD21A |
Texas Instruments |
RS-485 Transceiver | |
6 | SN65HVD21M-EP |
ETCTI |
Extended Common-Mode RS-485 Transceivers | |
7 | SN65HVD22 |
Texas Instruments |
Extended Common-Mode RS-485 Transceivers | |
8 | SN65HVD23 |
Texas Instruments |
Extended Common-Mode RS-485 Transceivers | |
9 | SN65HVD230 |
Texas Instruments |
3.3-V CAN Bus Transceivers | |
10 | SN65HVD230M-EP |
Texas Instruments |
3.3-V CAN Transceivers | |
11 | SN65HVD230Q-Q1 |
Texas Instruments |
3.3-V CAN Transceivers | |
12 | SN65HVD231 |
Texas Instruments |
3.3-V CAN Bus Transceivers |