The SN65HVD01 is a low-power, 250 kbps or 20 Mbps data rate selectable RS-485 transceiver, utilizing a 1.65-V to 3.6-V supply for data and enable signals, and a 3.3 V ± 10% supply for bus signals. The device is designed for applications requiring synchronous (parallel transceiver) signal timing. Onchip transient suppression protects the device against destru.
•1 Exceeds Requirements of TIA-485 Standard
• 1.65-V to 3.6-V Supply for Data and Enable
Signals
• 3-V to 3.6-V Supply for Bus Signals
• SLR Pin Selectable Data Rates: 250 kbps or 20
Mbps
• 1/8th Unit Load to Support up to 256 Nodes on a
Bus
• Small 3 mm x 3 mm SON Package
• Failsafe Receiver (Bus Open, Bus Shorted, Bus
Idle)
• Operating Temperature Range:
–40°C to 125°C
• Bus-Pin Protection More Than:
– ± 15kV HBM Protection
– ± 16kV IEC61000-4-2 Contact Discharge
– ± 16kV IEC61000-4-2 Air Discharge
– 4kV IEC61000-4-4 Fast Transient Burst
2 Applications
• Telecom Infrastructure
• High-Speed D.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN65HVD05 |
Texas Instruments |
HIGH OUTPUT RS-485 TRANSCEIVERS | |
2 | SN65HVD06 |
Texas Instruments |
HIGH OUTPUT RS-485 TRANSCEIVERS | |
3 | SN65HVD07 |
Texas Instruments |
HIGH OUTPUT RS-485 TRANSCEIVERS | |
4 | SN65HVD08 |
Texas Instruments |
Wide Supply Range RS-485 Transceiver | |
5 | SN65HVD09 |
Texas Instruments |
9-CHANNEL RS-422 / RS-485 TRANSCEIVER | |
6 | SN65HVD09-EP |
Texas Instruments |
9-CHANNEL RS-422 / RS-485 TRANSCEIVER | |
7 | SN65HVD10 |
Texas Instruments |
3.3-V RS-485 Transceivers | |
8 | SN65HVD10-EP |
Texas Instruments |
3.3V RS-485 TRANSCEIVERS | |
9 | SN65HVD101 |
Texas Instruments |
IO-Link PHY | |
10 | SN65HVD102 |
Texas Instruments |
IO-Link PHY | |
11 | SN65HVD1040 |
Texas Instruments |
Low-Power CAN Bus Transceiver | |
12 | SN65HVD1040-HT |
Texas Instruments |
LOW-POWER CAN TRANSCEIVER |