These octal buffers and line drivers feature the performance of the SNx4HC541 devices and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout. The 3-state outputs are controlled by a two-input NOR gate. If either output-enable (OE1 or OE2) input is high, all eight outputs are .
• Wide Operating Voltage Range of 2 V to 6 V
• High-Current 3-State Outputs Drive Bus Lines
Directly or Up to 15 LSTTL Loads
• Low Power Consumption, 80-µA Maximum ICC
• Typical tpd = 10 ns
• ±6-mA Output Drive at 5 V
• Low Input Current of 1 µA Maximum
• Data Flow-Through Pinout (All Inputs on Opposite
Side From Outputs)
2 Applications
• LEDs
• Servers
• PCs and Notebooks
• Wearable Health and Wellness Devices
• Electronic Points of Sale
1 OE1
19 OE2
3 Description
These octal buffers and line drivers feature the performance of the SNx4HC541 devices and a pinout with inputs and outputs on op.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SN54HC540 |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVER | |
2 | SN54HC541J |
Texas Instruments |
OCTAL BUFFERS AND LINE DRIVER | |
3 | SN54HC563 |
Texas Instruments |
OCTAL TRANSPARENT D-TYPE LATCHE | |
4 | SN54HC573A |
Texas Instruments |
Octal Transparent D-Type Latche | |
5 | SN54HC574 |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
6 | SN54HC574J |
Texas Instruments |
OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP | |
7 | SN54HC590A |
Texas Instruments |
8-BIT BINARY COUNTER | |
8 | SN54HC594 |
Texas Instruments |
8-Bit Shift Register | |
9 | SN54HC595 |
Texas Instruments |
8-Bit Shift Registers | |
10 | SN54HC595J |
Texas Instruments |
8-Bit Shift Registers | |
11 | SN54HC595J |
nexperia |
16-bit bus transceiver and transparant D-type latch | |
12 | SN54HC00 |
Texas Instruments |
Quadruple 2-Input Positive-NAND Gates |