FUNCTIONAL DESCRIPTION The SMH4804 integrated hot swap power controller operates within a wide supply range, typically -32 to -72 volts, and generates the signals necessary to drive isolatedoutput DC/DC converters. The general start-up procedure is as follows: • A physical connection must first be made with the chassis to discharge any electrostatic voltage.
AND APPLICATIONS INTRODUCTION The SMH4804 is a user-programmable -48V power supply controller designed to control the hot-swapping of plug-in cards and to sequence supplies in a distributed power environment. The SMH4804 drives an external power MOSFET switch that connects the bus side supply to the card side load and controls in-rush current while providing both current regulation and over-current protection. When the source and drain voltages of the external MOSFET are within specification, the SMH4804 asserts four PG[4:1]# power-good logic outputs either simultaneously or sequenced at prog.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SMH4802 |
Summit Microelectronics |
Programmable -48V Hot-Swap Controller | |
2 | SMH4803 |
Summit Microelectronics |
Distributed Power Hot-Swap Controller | |
3 | SMH4803A |
Summit Microelectronics |
Distributed Power Hot-Swap Controller | |
4 | SMH4811A |
Summit Microelectronics |
DISTRIBUTED POWER HOT SWAP CONTROLLER | |
5 | SMH4812 |
Summit Microelectronics |
Distributed Power Hot-Swap Controller | |
6 | SMH4814 |
Summit Microelectronics |
Dual Feed Active-ORing Programmable Hot Swap Controller | |
7 | SMH4042 |
Summit Microelectronics |
Hot Swap Controller | |
8 | SMH4042A |
Summit Microelectronics |
Distributed Power Hot-Swap Controller | |
9 | SMH4044 |
Summit Microelectronics |
Compact PCI Hot-Swap Controller | |
10 | SMH4046 |
Summit Microelectronics |
Active DC Output Control (ADOCTM) Power Manager | |
11 | SMH4527 |
Stackpole |
Surface Mount Wirewound Resistor | |
12 | SMH320FL-C |
SeCoS |
3.0 Amp Surface Mount Schottky Barrier Rectifiers |