The SMBJ-HR High Reliability series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features • Excellent clamping capability • Low incremental surge resistance • Typical 11.10V IR ≤ 1µA for VR > • SMT for minimal board footprint • Low profile p.
• Excellent clamping capability
• Low incremental surge resistance
•
Typical 11.10V
IR
≤
1µA
for VR >
• SMT for minimal board footprint
• Low profile package
• Typical failure mode is short from over-specified voltage or current
• Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
• IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact) ESD protection of data lines in accordance with IEC 61000-4-2 (IEC801-2)
• EFT protection of data lines in accordance with IEC 61000-4-4 (IEC801-4)
• Built-in strain relief
• Fast response time: typically less than 1.0ps fro.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SMBJ7.5A-HRA |
Littelfuse |
Transient Voltage Suppression Diodes | |
2 | SMBJ7.5A |
AiT Semiconductor |
TRANSIENT VOLTAGE SUPPRESSOR | |
3 | SMBJ7.5A |
Multicomp |
Transient Voltage Suppressor | |
4 | SMBJ7.5A |
LITE-ON |
SURFACE MOUNT UNIDIRECTIONAL AND BIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSORS | |
5 | SMBJ7.5A |
EIC |
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | |
6 | SMBJ7.5A |
BOURNS |
TVS Diode | |
7 | SMBJ7.5A |
Taiwan Semiconductor |
Surface Mount Transient Voltage Suppressor | |
8 | SMBJ7.5A |
TAITRON |
Transient Voltage Suppressor | |
9 | SMBJ7.5A |
Microsemi |
Transient Voltage Suppressor | |
10 | SMBJ7.5A |
Diodes |
600W SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | |
11 | SMBJ7.5A |
MCC |
600Watt TVS | |
12 | SMBJ7.5A |
Vishay |
TRANSZORB TVS |