The SM8205 is a current mode control wide-input voltage (8V to 48V) LED driver IC specifically designed to power one or multi-strings of high power LEDs. The 10V gate driver allow the use of standard level MOSFET . The low voltage 5.0V VCC is used to power the internal logic and also acts as a reference voltage to set the current level. An external resistor .
●
●
●
●
●
●
●
●
●
●
●
●
●
● Wide input operating voltage range from 8V to 48V Internal 2% reference voltage Integrated PWM dimming N-channel MOSFET driver Dimming ratio: 1000:1 100KHz to 1MHz programmable high-frequency operation Programmable slope compensation Input under-voltage protection LED short-circuit protection (SCP) LED open-voltage protection (OVP) Junction over-temperature shutdown protection Drivers LEDs in Boost, Buck-Boost, SEPIC Topology Cycle-by-cycle current limit Soft start Providing SOP-16 Package
APPLICATIONS
●
●
●
● Single-string LED LCD backlighting High power LED drive.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SM8200 |
SamHop |
High Efficiency Step Down LED Driver | |
2 | SM8200C |
SeCoS |
8.0A Schottky Barrier Rectifiers | |
3 | SM8205A |
ANPEC |
Dual N-Channel Enhancement Mode MOSFET | |
4 | SM8205AO |
Sinopower |
Dual N-Channel MOSFET | |
5 | SM8206ACT |
Sinopower |
Dual N-Channel MOSFET | |
6 | SM8206AO |
Sinopower |
Dual N-Channel MOSFET | |
7 | SM8207 |
SamHop |
step-down constant current LED driver IC | |
8 | SM820B |
SeCoS |
8.0 AMP Surface Mount Schottky Barrier Rectifiers | |
9 | SM820C |
SeCoS |
8.0 AMP Surface Mount Schottky Barrier Rectifiers | |
10 | SM820D |
SeCoS |
8.0 AMP Surface Mount Schottky Barrier Rectifiers | |
11 | SM82 |
MIC |
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR | |
12 | SM8210S |
Nippon Precision Circuits Inc |
Signal Processor for Paging Receivers |