The SG140A/140 series of positive regulators offer self contained, fixed-voltage capability with up to 1.5A of load current and input voltage up to 50V (SG140A series only). These units feature a unique on-chip trimming system to set the output voltages to within ±1.5% of nominal on the SG140A series and ±2.0% on the SG140 series. The SG140A versions also of.
of thermal shutdown, current limiting, and safe-area control have been designed into these units and since these regulators require only a small output capacitor for satisfactory performance, ease of application is assured. Although designed as fixed-voltage regulators, the output voltage can be increased through the use of a simple voltage divider. The low quiescent drain current of the device insures good regulation when this method is used. Product is available in hermetically sealed TO-257 (isolated), TO-3, TO-66, and TO-39 power packages.
FEATURES
• Output voltage set internally to ±1.5%.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SG140A |
Microsemi Corporation |
positve fixed voltage regulator | |
2 | SG143 |
Microsemi Corporation |
HIGH-VOLTAGE OPERATIONAL AMPLIFIER | |
3 | SG1436 |
ETC |
High Voltage Operational Amplifier | |
4 | SG1436 |
Microsemi Corporation |
(SG1436 / SG1536) HIGH-VOLTAGE OPERATIONAL AMPLIFIER | |
5 | SG14HC153 |
ETC |
Dual 4 to 1 data selector | |
6 | SG1000 |
Motorola |
Split Third Port Telecommunications Optical Node Installation and Operation Manual | |
7 | SG1010AZG-T-1 |
ETC |
TFT module | |
8 | SG106 |
SEMIWILL |
CATV Amplifier | |
9 | SG107 |
Silicon General |
Operational Amplifiers | |
10 | SG109 |
Microsemi Corporation |
5 -VOLT FIXED VOLTAGE REGULATORS | |
11 | SG10L20USM |
SHINDENGEN |
Fast Recovery Diode | |
12 | SG10LC20USM |
SHINDENGEN |
Fast Recovery Diode |