The SC803 is a fully integrated, single cell, constant-current constant-voltage Lithium-Ion battery charger management system. The SC803 has built in intelligence and extreme functionality. When the battery voltage is below 2.8V the charger operates in a pre-charge mode with a charging current of up to 125mA based on the ITERM pin resistor. This pre-charge m.
Fully integrated charger with FET pass transistor, reverse-blocking diode, sense resistor and thermal protection Complete voltage ranges of 4.1V, 4.2V & adjustable Programmable precharge, fastcharge & termination current Battery voltage controlled to 1% accuracy Soft-start for step load and adaptor plug-in Up to 1.5A continuous charge current Charge current monitor output from microcontroller or ADC Interface The part also features current termination, ending the charge cycle when the battery is charged and the charge Input voltages range from 4.2V to 7V current drops below th.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SC8002 |
FUMAN ELECTRONICS |
3W audio amplifier | |
2 | SC8002B |
FUMAN ELECTRONICS |
3W audio amplifier | |
3 | SC801 |
Semtech Corporation |
Fully Integrated High Currnet Lithium-Ion Battery Charger System | |
4 | SC802-04 |
Fuji Electric |
SCHOTTKY BARRIER DIODE | |
5 | SC802-06 |
Fuji Electric |
SCHOTTKY BARRIER DIODE | |
6 | SC802-09 |
Fuji Electric |
SCHOTTKY BARRIER DIODE | |
7 | SC8035 |
NXP |
(SC80xx) Single Chip 8-Bit Microcontroller | |
8 | SC8039 |
NXP |
(SC80xx) Single Chip 8-Bit Microcontroller | |
9 | SC8040 |
NXP |
(SC80xx) Single Chip 8-Bit Microcontroller | |
10 | SC8048 |
NXP |
(SC80xx) Single Chip 8-Bit Microcontroller | |
11 | SC8049 |
NXP |
(SC80xx) Single Chip 8-Bit Microcontroller | |
12 | SC804A |
Semtech |
Fully Integrated 4.4V Lithium-Ion Battery Charger System |