SAS-560 Passive Loop Antenna 20 Hz – 2 MHz This Loop sensor is built in accordance to the MIL-STD 461 specification for low frequency magnetic field testing. Frequency Range: Turns: Shielding: Connector: 20 Hz - 2 MHz 36 (7-41 Litz) Electrostatic BNC, Female Features Low Frequency Range of 20 Hz to 2 MHz Individually Calibrated (Calibration includ.
Low Frequency Range of 20 Hz to 2 MHz Individually Calibrated (Calibration included per IEEE-291) Rugged Construction Three Year Warranty
The SAS-560 passive Loop antenna was built for MIL-STD 461 RE 101 testing. This passive loop antenna has 36 turns enclosed in an electrostatic shielded loop. The loop diameter is 5 1/4" (13.3 cm) and has approximately 10 ohms of DC resistance. The Passive Loop Antenna is an ideal solution for a wide range of magnetic field testing. Whether used in a set to measure shielding effectiveness per MIL-STD 285 and NSA 65-6, or individually to satisfy speci.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SAS1-XXXX-A |
ETC |
OEL Display Module | |
2 | SAS201S2 |
ETC |
digital Sonderbausteine | |
3 | SAS201S4 |
ETC |
digital Sonderbausteine | |
4 | SAS211S2 |
ETC |
digital Sonderbausteine | |
5 | SAS211S4 |
ETC |
digital Sonderbausteine | |
6 | SAS221S2 |
ETC |
digital Sonderbausteine | |
7 | SAS221S4 |
ETC |
digital Sonderbausteine | |
8 | SAS560 |
Siemens |
SAS560 / SAS570 | |
9 | SAS560S |
ETC |
Senser for Electronic Tuning | |
10 | SAS560S |
Siemens |
Switching Amplifier | |
11 | SAS570 |
Siemens |
SAS560 / SAS570 | |
12 | SAS570S |
Hitachi |
Senser for Electronic Tuning |