The SA9504 is an integrated receiver front-end for 900 MHz Cellular (AMPS) and 1.9 GHz PCS (CDMA) phones. This dual-band receiver circuit has low noise amplifiers and downconverters for both bands, and provides an elegant solution for RF-to-IF conversion. The two cascode LNAs have been designed to provide high gain with very low noise figures and high linear.
LNA typical performance
PARAMETER Gain (dB) Noise figure (dB) Input IP3 (dBm) Current (mA) Cellular LNA 16.5 1.6
–2 4.9 PCS (CDMA) LNA 14.8 2 1 4.9
• Separate, selectable IF outputs to suit FM and CDMA bandwidths
• Buffered Cellular and PCS LO inputs
• Integrated frequency doubler for PCS mixer LO
• Differential (Tx) LO output buffer (can be switched on or off)
• Low voltage operation down to 2.7 volts
• Mixers current consumption with (Tx) LO buffer on:
– Cellular FM: 17.4 mA
– PCS: 27.6 mA
• Low standby current in sleep mode: <50 µA
• Small LQFP32 package
APPLICATIONS
• LNAs for both Cell.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SA9500 |
Philips |
Dual-band / CDMA/AMPS downconverter IC | |
2 | SA9502 |
Philips |
Dual-band / CDMA/AMPS downconverter IC | |
3 | SA9503 |
Philips |
Dual-band / CDMA/AMPS LNA and downconverter mixers | |
4 | SA9.0 |
MIC |
AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSORS | |
5 | SA9.0 |
Crydom |
Transient Voltage Suppression (TVS) Diodes | |
6 | SA9.0 |
Microsemi |
Transient Voltage Suppressors | |
7 | SA9.0 |
Pan Jit International |
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR POWER 500 Watt | |
8 | SA9.0 |
Won-Top Electronics |
500W TRANSIENT VOLTAGE SUPPRESSOR | |
9 | SA9.0 |
MEI |
TRANSIENT VOLTAGE SUPPRESSOR | |
10 | SA9.0 |
Crownpo |
Transient Voltage Suppressors | |
11 | SA9.0 |
GME |
TRANSIENT VOLTAGE SUPPRESSOR | |
12 | SA9.0 |
SEMITECH |
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR |