The SA58640 is a low-voltage monolithic FM IF system incorporating a mixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector, logarithmic RSSI, voltage regulator and audio and RSSI operational amplifiers. The SA58640 is available in a 20-pin SSOP package. 3. Features and benefits Low power consumption: 5.0 mA typical at 5 V .
Low power consumption: 5.0 mA typical at 5 V Mixer input to >100 MHz Mixer conversion power gain of 17 dB at 45 MHz Crystal oscillator effective to 100 MHz (LC oscillator or external oscillator can be used at higher frequencies) 102 dB of IF amplifier/limiter gain 2 MHz IF amplifier/limiter small signal bandwidth Temperature compensated logarithmic RSSI with a 70 dB dynamic range Low external component count; suitable for crystal/ceramic/LC filters Audio output internal op amp RSSI output internal op amp Internal op amps with rail-to-rail outputs ESD protection: Human b.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SA58640DK |
NXP Semiconductors |
Low-voltage mixer FM-IF | |
2 | SA58641 |
NXP |
High performance mixer FM-IF | |
3 | SA58641DK |
NXP |
High performance mixer FM-IF | |
4 | SA58643 |
NXP |
Single Pole Double Throw SPDT Switch | |
5 | SA58643DP |
NXP |
Single Pole Double Throw SPDT Switch | |
6 | SA58646 |
NXP |
UHF 900MHz transceiver | |
7 | SA58646BD |
NXP |
UHF 900MHz transceiver IC | |
8 | SA58646BD |
NXP |
UHF 900MHz transceiver | |
9 | SA58603 |
NXP |
High precision operational amplifier | |
10 | SA58631 |
NXP |
3W BTL Audio Amplifier | |
11 | SA58632 |
NXP |
2 x 2.2W BTL Audio Amplifier | |
12 | SA58635 |
NXP |
2 X 25 MW Class-G Stereo Headphone Driver |