The SA5200 is a dual amplifier with DC to 1200MHz response. Low noise (NF = 3.6dB) makes this part ideal for RF front-ends, and a simple power-down mode saves current for battery operated equipment. Inputs and outputs are matched to 50Ω. The enable pin allows the designer the ability to turn the amplifiers on or off, allowing the part to act as an amplifier .
• Dual amplifiers
• DC - 1200MHz operation
• Low DC power consumption (4.2mA per amplifier @ VCC = 5V)
• Power-Down Mode (ICC = 95µA typical)
• 3.6dB noise figure at 900MHz
• Unconditionally stable
• Fully ESD protected
• Low cost
ORDERING INFORMATION
DESCRIPTION 8-Pin Plastic Small Outline (Surface
–mount)
SR00166
• Supply voltage 4-9V
• Gain S21 = 7dB at f = 1GHz
• Input and output match S11, S22 typically <
–14dB
APPLICATIONS
Figure 1. Pin Configuration
• Cellular radios
• RF IF strips
• Portable equipment
TEMPERATURE RANGE
–40-+85°C ORDER CODE SA5200D DWG # SOT96-1
BLOCK DIAGRAM
IN2 4 .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | SA5204 |
Philips |
Wide-band high-frequency amplifier | |
2 | SA5205 |
Philips |
Wide-band high-frequency amplifier | |
3 | SA5205A |
Philips |
Wide-band high-frequency amplifier | |
4 | SA5209 |
Philips |
Wideband variable gain amplifier | |
5 | SA52 |
ETC |
13.2MM SINGLE DIGIT NUMERIC DISPLAYS | |
6 | SA52-11 |
ETC |
13.2 MM SIGNLE DIGIT NUMERIC DISPLAYS | |
7 | SA52-11 |
Kingbright Electronic |
SINGLE DIGIT NUMERIC DISPLAYS | |
8 | SA52-11EWA |
ETC |
13.2MM SINGLE DIGIT NUMERIC DISPLAYS | |
9 | SA52-11EWA |
Kingbright Electronic |
(SA52-11xxx) Sidplay - 13 mm | |
10 | SA52-11GWA |
ETC |
13.2 MM SIGNLE DIGIT NUMERIC DISPLAYS | |
11 | SA52-11GWA |
Kingbright Electronic |
(SA52-11xxx) Sidplay - 13 mm | |
12 | SA52-11HWA |
Kingbright Electronic |
(SA52-11xxx) Sidplay - 13 mm |