S25FL128P 128-Mb 3.0 V Flash Memory Datasheet

S25FL128P 128-Mb 3.0 V Flash Memory

The S25FL128P is a 3.0 Volt (2.7V to 3.6V), single-power-supply Flash memory device. The device consists of 64 sectors of 256 KB memory, or 256 sectors of 64 KB memory. The device accepts data written to SI (Serial Input) and outputs data on SO (Serial Output). The devices are designed to be programmed in-system with the standard system 3.0 volt VCC supply. .

Features

 Memory Protection
  – WP#/ACC pin works in conjunction with Status Register Bits to protect specified memory areas
  – 256 KB uniform sector product: Status Register Block Protection bits (BP2, BP1, BP0) in status register configure parts of memory as read-only.
  – 64KB uniform sector product: Status Register Block Protection bits (BP3, BP2, BP1, BP0) in status register configure parts of memory as read-only Software Features
  – SPI Bus Compatible Serial Interface Hardware Features
 x8 Parallel Programming Mode (for 16-pin SO package only) General Description The S25FL128P is a 3.0 Volt (2.7V to.

The same part from a different manufacturer

S25FL128P - SPANSION

of Spansion data sheet designations are presented here to highlight their presence and definitions. Advance Informatio.

Related Product

No.	Partie #	Fabricant	Description
1	S25FL128K	SPANSION	128-Mbit CMOS 3.0 Volt Flash Memory
2	S25FL128L	Cypress	3.0V FL-L Flash Memory
3	S25FL128S	Cypress	3.0V SPI Flash Memory
4	S25FL128S	SPANSION	Flash Non-Volatile Memory CMOS Core
5	S25FL128S	Infineon	128Mb (16MB) FL-S Flash
6	S25FL127S	Cypress Semiconductor	128 Mbit (16 Mbyte) 3.0V SPI Flash Memory
7	S25FL127S	SPANSION	128 Mbit (16 Mbyte) MirrorBit Flash Non-Volatile Memory
8	S25FL127S	Infineon	128Mb (16MB) FL-S Flash
9	S25FL129P	Cypress Semiconductor	128-Mbit 3.0 V Flash Memory
10	S25FL129P	SPANSION	128-Mbit CMOS 3.0 Volt Flash Memory
11	S25FL1-K	SPANSION	CMOS 3.0-Volt Flash Non-Volatile Memory
12	S25FL116K	Cypress Semiconductor	3.0V SPI Flash Memory

S25FL128P - Cypress Semiconductor