The S25FL032P is a 3.0 V (2.7 V to 3.6 V), single-power-supply Flash memory device. The device consists of 64 uniform 64-KB sectors with the two (top or bottom) 64-KB sectors further split up into thirty-two 4-KB sub sectors. The S25FL032P device is fully backward compatible with the S25FL032A device. The device accepts data written to Serial Input (SI) and .
Memory protection
– W#/ACC pin works in conjunction with Status Register Bits
One time programmable (OTP) area for permanent, secure
to protect specified memory areas
identification; can be programmed and locked at the factory or by the customer
– Status Register Block Protection bits (BP2, BP1, BP0) in status register configure parts of memory as read-only
Cypress Semiconductor Corporation
• 198 Champion Court Document Number: 002-00650 Rev.
*L
• San Jose, CA 95134-1709
• 408-943-2600
Revised May 19, 2017
S25FL032P
General Description
The S25FL032P is a 3.0 V (2.7 V to 3.6 V), sing.
of Spansion data sheet designations are presented here to highlight their presence and definitions. Advance Information.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | S25FL032A |
SPANSION |
Flash Memory | |
2 | S25FL032K |
SPANSION |
32-Mbit CMOS 3.0 Volt Flash Memory | |
3 | S25FL001D |
SPANSION |
(S25FL001D / S25FL002D) Flash Memory | |
4 | S25FL002D |
SPANSION |
(S25FL001D / S25FL002D) Flash Memory | |
5 | S25FL004A |
SPANSION |
Flash Memory | |
6 | S25FL004D |
SPANSION |
Flash Memory | |
7 | S25FL004K |
SPANSION |
4-Mbit / 8-Mbit / 16-Mbit CMOS 3.0 Volt Flash Memory | |
8 | S25FL008A |
SPANSION |
Flash Memory | |
9 | S25FL008K |
SPANSION |
4-Mbit / 8-Mbit / 16-Mbit CMOS 3.0 Volt Flash Memory | |
10 | S25FL016A |
SPANSION |
16 Megabit CMOS 3.0 Volt Flash Memory | |
11 | S25FL016K |
SPANSION |
4-Mbit / 8-Mbit / 16-Mbit CMOS 3.0 Volt Flash Memory | |
12 | S25FL040A |
SPANSION |
Flash Memory |