and correct some features typo. Remove pins strapping function in LED_P4_2, LED_P3_2, LED_P3_0, LED_P2_2, LED_P0_2, LED_P1_0, and LED_P0_0. Change pins name of STESTG0/1/2, STESTL0/1/2, STESTT, STESTH, STESTCKP/N, STESTOP/N, and STESTIP/N to SGND, SVDDL, SVDDT, SVDDH, SDCKP/N, SDTXP/N, and SDRXP/N. Figure 8, Figure 9, Table 2, Table 3, Table 5, and Table 16..
typo. Remove pins strapping function in LED_P4_2, LED_P3_2, LED_P3_0, LED_P2_2, LED_P0_2, LED_P1_0, and LED_P0_0. Change pins name of STESTG0/1/2, STESTL0/1/2, STESTT, STESTH, STESTCKP/N, STESTOP/N, and STESTIP/N to SGND, SVDDL, SVDDT, SVDDH, SDCKP/N, SDTXP/N, and SDRXP/N. Figure 8, Figure 9, Table 2, Table 3, Table 5, and Table 16. Add Serdes interface pin description and mode selection in section 6.2 and 9.4. Add LED_P4_2/RESERVED pin description for normal operation. Add configuration strapping pins description in section 6.6. Remove chapter 3 and enhance application example in chapter 4. A.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RTL8366 |
Realtek |
6/9-PORT 10/100/1000MBPS SWITCH CONTROLLER | |
2 | RTL8366SR |
Realtek |
SINGLE-CHIP 5+1-PORT 10/100/1000 MBPS SWITCH CONTROLLER | |
3 | RTL8363SB |
Realtek |
LAYER 2 MANAGED 2+2-PORT 10/100/1000M SWITCH CONTROLLER | |
4 | RTL8363SB-CG |
Realtek |
LAYER 2 MANAGED 2+2-PORT 10/100/1000M SWITCH CONTROLLER | |
5 | RTL8367RB |
Realtek |
LAYER 2 MANAGED 5+2-PORT 10/100/1000 SWITCH CONTROLLER | |
6 | RTL8367RB-CG |
Realtek |
LAYER 2 MANAGED 5+2-PORT 10/100/1000 SWITCH CONTROLLER | |
7 | RTL8367S-CG |
Realtek |
10/100/1000M SWITCH CONTROLLER | |
8 | RTL8369 |
Realtek |
6/9-PORT 10/100/1000MBPS SWITCH CONTROLLER | |
9 | RTL8304E |
Realtek |
PROGRAMMING GUIDE | |
10 | RTL8305NB |
Realtek |
SINGLE-CHIP 5-PORT 10/100M ETHERNET SWITCH CONTROLLER | |
11 | RTL8305NB-CG |
Realtek |
SINGLE-CHIP 5-PORT 10/100M ETHERNET SWITCH CONTROLLER | |
12 | RTL8305S |
Realtek |
5-PORT 10/100 MBPS SINGLE CHIP SWITCH CONTROLLER |