The RTC6671 power amplifier (PA) is designed to operate in 5GHz ISM band, compatible with 802.11a wireless LAN system with high power, high gain. The Amplifier consists of 3 gain stages with inter-stage matching, build-in input matching network, and a power detector for close loop power control operation. In 802.11a mode (OFDM 64QAM, 54Mbps), it provides a l.
RICHW 1 www.richwave.com.tw Specifications subject to change without notice REV0.4 Preliminary Confidential Proprietary T-ST-6671-DST-001 Data Sheet RTC6671 Aug 2008 PIN FUNCTION DESCRIPTION PIN FUNCTION DESCRIPTION 1,5,9,13,15 NC 2 RFIN L 3 RFIN IA 4 VREF1,2 T 6 VREF3 7 VCCB N 8 PD E 10,11,12 RFOUT/VCC3 ID 14 VCC2 F 16 VCC1 Not connected RF input. Input matching network is built on chip. Same as pin 2 Bias Control voltage of power stage-1 and stage-2, via R1 to 2.9V. Pin 4,6 can be used to control PA on/off. Bias Control voltage of power stage-3, via R2 to 2.9V. Pi.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RTC6671B |
RichWave |
Power Amplifier | |
2 | RTC6603SP |
RichWave |
0.1 GHz - 3.0 GHz SPDT Switch | |
3 | RTC6607SP |
RichWave |
0.1 GHz - 3.0 GHz SPDT Switch | |
4 | RTC6608O |
RichWave |
0.1 - 6.0 GHz SPDT Switch | |
5 | RTC6608OSP |
RichWave |
0.1 GHz - 6.0 GHz SPDT Switch | |
6 | RTC6610 |
RichWave |
Wide band low noise amplifier | |
7 | RTC6617SP |
RichWave |
0.1 GHz - 6.0 GHz SP3T Switch | |
8 | RTC6619SP |
RichWave |
0.5 GHz - 6.0 GHz SPDT Switch | |
9 | RTC6649 |
RichWave |
Power Amplifier | |
10 | RTC6649E |
RichWave |
Power Amplifier | |
11 | RTC6649EX |
RichWave |
2.4 - 2.5 GHz Power Amplifier | |
12 | RTC6655F |
RichWave |
2.4/5 GHz Dual Band Antenna Switch Module |