Recherchez avec le numéro de pièce ainsi que le fabricant ou la description
VIN (Pin 1) Input voltage which supplie s current to the output pin. Connect this pin to a well-decoupled supply voltage. To prevent the input rail from dropping during large load transient, a large, low ESR capacitor is recommended to use. The capacitor should be placed as close as possible to the VIN pin. GND [Pin 2, Exposed pad (9)] Common Ground (Exposed.
include extremely low initial offset voltage, excellent load regulation, current limiting in bi-directions and on-chip thermal shut-down prote ction. The RT9173C are available in the SOP-8 (Exposed Pad) surface mount pa ckages. Features z z z z z z z z z z z z z Ideal for DDR-I, DDR-II and DDR-III V TT Applications Sink and Source 2A Continuous Current Integrated Power MOSFETs Generates Termination Voltage for SSTL_2, SSTL _18, HSTL, SCSI-2 and SCSI-3 Interfaces High Accuracy Output Voltage at Full-Load Output Adjustment by T wo External Resistors Low External Component Count Shutdown for .
| No. | Partie # | Fabricant | Description | Fiche Technique |
|---|---|---|---|---|
| 1 | RT9173 |
Richtek Technology Corporation |
1.5A/3A Bus Termination Regulator |
|
| 2 | RT9173A |
Richtek Technology Corporation |
1.5A/3A Bus Termination Regulator |
|
| 3 | RT9173B |
Richtek |
2A Bus Termination Regulator |
|
| 4 | RT9173D |
Richtek |
Peak 3A Sink/Source Bus Termination Regulator |
|
| 5 | RT9170 |
Richtek Technology Corporation |
CMOS LDO Regulator |
|
| 6 | RT9172 |
Richiek |
3A Fixed Output Voltage LDO Regulator |
|
| 7 | RT9174 |
Richiek |
Triple Linear Regulator Controllers |
|
| 8 | RT9176 |
Richtek |
1.5A Fixed and Adjustable Low Dropout Positive Voltage Regulators |
|
| 9 | RT9177 |
Richiek |
Ultra-Low-Noise 200mA/500mA LDO Regulator |
|
| 10 | RT9177A |
Richiek |
Ultra-Low-Noise 200mA/500mA LDO Regulator |
|
| 11 | RT9178 |
Richtek Technology Corporation |
Ultra-Fast CMOS LDO Regulator |
|
| 12 | RT9179 |
Richtek Technology Corporation |
300mA LDO Regulator |
|