The RT2568 is a sink/source tracking termination regulator. It is specifically designed for low-cost and low-external component count systems. The RT2568 possesses a high speed operating amplifier that provides fast load transient response and only requires a minimum 10μF x 3 ceramic output capacitor. The RT2568 supports remote sensing functions and all feat.
required to power the DDRIII and Low Power DDRIII / DDRIV VTT bus termination according to the JEDEC specification. In addition, the RT2568 provides an open-drain PGOOD signal to monitor the output regulation and an EN signal that can be used to discharge VTT during S3 (suspend to RAM) for DDR applications.
The RT2568 is available in the thermal efficient package, WDFN-10L 3x3.
Features
VIN Input Voltage Range : 1.1V to 3.5V
VCNTL Input Voltage Range : 2.9V to 5.5V
Support Ceramic Capacitors
Power Good Indicator
10mA Source/Sink Reference Output
Meet DDRI, DDRII JEDEC Spec
Suppo.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RT256128A-1 |
Shenzhen |
LCD Module | |
2 | RT2568A |
RichTek |
DDR Termination Regulator | |
3 | RT25 |
Vishay Siliconix |
Wirewound Rheostat/Potentiometer | |
4 | RT2512 |
YAGEO |
THIN FILM CHIP RESISTORS | |
5 | RT2512 |
HITANO |
Thick Film Chip Resistor | |
6 | RT2515H |
Richtek |
Ultra-Low Dropout LDO Regulator | |
7 | RT2516 |
Richtek |
Ultra-Low Dropout LDO Regulator | |
8 | RT2517B |
Richtek |
Ultra-Low Dropout Linear Regulator | |
9 | RT2519 |
Richtek |
Low-Dropout Linear Regulator | |
10 | RT2519W |
Richtek |
Low-Dropout Linear Regulator | |
11 | RT2526Q |
Richtek |
DDR Termination Regulator | |
12 | RT2528 |
Richtek |
2.5A Power Switch |