This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65V to 5.5V while it tracks the VCCA supply, and the B ports supporting operat.
• No Direction-Control
• Data Rates
24Mbps (Push-Pull) 2Mbps (Open-Drain)
• 1.65V to 5.5V on A ports and 2.3V to 5.5V on B Ports (VCCA≤VCCB)
• VCC Isolation: If Either VCC is at GND, Both Ports are in the High-Impedance State
• No Power-Supply Sequencing Required: Either VCCA or VCCB can be Ramped First
• IOFF: Supports Partial-Power-Down Mode Operation
• Extended Temperature: -40°C to +85°C
APPLICATIONS
• I2C/ SMBus
• UART
• GPIO
DESCRIPTION
This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between m.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RS010 |
Vishay |
Wirewound Resistors | |
2 | RS01A |
Vishay |
Wirewound Resistors | |
3 | RS01M |
Vishay |
Wirewound Resistors | |
4 | RS002 |
Vishay |
Wirewound Resistors | |
5 | RS005 |
Vishay |
Wirewound Resistors | |
6 | RS007 |
Vishay |
Wirewound Resistors | |
7 | RS02B |
Vishay Siliconix |
Wirewound Resistors | |
8 | RS02C |
Vishay |
Wirewound Resistors | |
9 | RS02M |
Vishay |
Wirewound Resistors | |
10 | RS07A |
YFD |
1.0 AMP. SURFACE MOUNT GENERAL PURPOSE FAST RECOVERY RECTIFIERS | |
11 | RS07B |
Bruckewell |
Surface Mount Fast Rectifiers | |
12 | RS07B |
Vishay Siliconix |
Fast Rectifier |