RH1086M 0.5A and 1.5A Low Dropout Positive Adjustable Regulators DESCRIPTIO ABSOLUTE AXI U RATI GS PRECONDITIONI G 100% Thermal Limit Burn-In The RH1086M is pin compatible with older 3-terminal regulators. A 10µF output capacitor is required on this new device. However, this is usually included in most regulator designs. The wafer lots are processed to .
n currently available devices. All internal circuitry is designed to operate down to 1V inputto-output differential and the dropout voltage is fully specified as a function of load current. Dropout is guaranteed at a maximum of 1.5V at maximum output current, decreasing at lower load currents. On-chip trimming adjusts the output voltage to 1%. Current limit is also trimmed, minimizing the stress on both the regulator and power source circuitry under overload conditions. Power Dissipation.. Internally Limited Input-to-Output Voltage Differential .......
The RH1086M positive adjustable regulator is designed to provide 0.5A for the H package and 1.5A for the K package with .
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RH108A |
Linear Technology |
Operational Amplifier | |
2 | RH108A |
Analog Devices |
Operational Amplifier | |
3 | RH10 |
Vishay |
Heatsink Encased Wirewound Power Resistors | |
4 | RH100 |
RKC |
RH SERIES Controller | |
5 | RH100 |
Vishay |
Wirewound Resistors | |
6 | RH100-P |
LEM |
Coreless Coil Current Transducer RH 100~1000-P | |
7 | RH100-S |
LEM |
Coreless Coil Current Transducer RH 100~1000-S | |
8 | RH1000-P |
LEM |
Coreless Coil Current Transducer RH 100~1000-P | |
9 | RH1000-S |
LEM |
Coreless Coil Current Transducer RH 100~1000-S | |
10 | RH1009 |
Analog Devices |
2.5V Reference | |
11 | RH1009 |
Linear Technology |
2.5V Reference | |
12 | RH101 |
HY ELECTRONIC |
(RH101 - RH105) SURFACE MOUNT GLASS PASSIVATED BARRIER RECTIFIERS |