RailClamp® TVS arrays are ultra low capacitance ESD protection devices designed to protect high speed data interfaces. This series has been specifically designed to protect sensitive components which are connected to high-speed data and transmission lines from overvoltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electri.
low capacitance TVS diodes for protection of the USB data (DP, DM) and USB ID (accessory detect) pins operating up to 5 volts. Loading capacitance on these lines is <1pF for maximum signal integrity. An integrated 28 volt TVS diode is used for protection of the USB voltage bus. This ensures the device will remain in a high-impedance state during normal USB operation or when the battery is being charged. Leakage current of the VBus protection is <100nA when operating at 28 volts. The RClamp3654PA is in a 6-pin SLP1616P6 package. It measures 1.6 x 1.6 x 0.60mm. The leads are spaced at a pitch of.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | RCLAMP3654P |
Semtech Corporation |
Low Capacitance TVS Array | |
2 | RClamp3655P |
SEMTECH |
ESD Protection | |
3 | RClamp3624T |
SEMTECH |
ESD Protection | |
4 | RClamp3631P |
SEMTECH |
1-Line ESD and EOS Protection | |
5 | RCLAMP3304N |
Semtech |
2.5V & 3.3V TVS Arrays | |
6 | RCLAMP3304N |
Leiditech |
4-Line 3.3V ESD Protection Diode Array | |
7 | RCLAMP3304P |
Semtech Corporation |
(RCLAMP2504P / RCLAMP3304P) 2.5V & 3.3V TVS Arrays | |
8 | Rclamp3311P-N |
Leiditech |
TVS DIODE | |
9 | RCLAMP3321P |
Leiditech |
1-CHANNEL ULTRA LOW CAPACITANCE ESD DIODE | |
10 | RClamp3321P |
Semtech |
3.3V ESD protection | |
11 | RClamp3324P |
Semtech |
4-Line Surge and ESD Protection | |
12 | RClamp3328P |
Semtech |
8-Line ESD Protection |