The PT8A264X is a CMOS LSI chip designed for use in automatic PIR lamp control. It can operate with a 2-wire configuration for triac applications or with a 3-wire configuration for relay applications. The chip is equipped with operational amplifiers, a comparator, timer, a zero crossing detector, control circuit, a voltage regulator, a system oscillator, and.
Operating voltage: 5V (Typ.)
Average supply current: 120µA (Typ.)
2 stage op-amp for filter.
Build-in noise rejection circuit.
On-chip regulator.
Adjustable output duration
Override function.
ON/AUTO/OFF selectable by MODE pin
Apply to AC 220V/50Hz and 110V/60Hz.
Auto-reset if the ZC signal disappears over 3
seconds
Output pulse (PT8A2641/5/7) to drive triac or
output level (PT8A2642/6/8) to drive relay.
CDS to enable/disable output.
40 second warm-up.
Quick check mode for installation.
PT8A2641-2642/2645-2648
|||||||||||||||||||||||||||||||||||||||||||||||||||||||.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PT8A2642 |
Pericom Technology |
PIR Sensor Light Switch | |
2 | PT8A2645 |
Pericom Technology |
PIR Sensor Light Switch | |
3 | PT8A2646 |
Pericom Technology |
PIR Sensor Light Switch | |
4 | PT8A2647 |
Pericom Technology |
PIR Sensor Light Switch | |
5 | PT8A2648 |
Pericom Technology |
PIR Sensor Light Switch | |
6 | PT8A261 |
Pericom Technology |
(PT8A261 / PT8A262) PIR Sensor Light Switch Controller | |
7 | PT8A2611 |
Pericom Technology |
PIR Sensor Light Switch Controller | |
8 | PT8A2612 |
Pericom Technology |
PIR Sensor Light Switch Controller | |
9 | PT8A262 |
Pericom Technology |
(PT8A261 / PT8A262) PIR Sensor Light Switch Controller | |
10 | PT8A2621 |
Pericom Technology |
PIR Sensor Light Switch Controller | |
11 | PT8A2651 |
Pericom Technology |
PIR Sensor Light Switch Controller | |
12 | PT8A2651W |
Pericom Technology |
PIR Sensor Light Switch Controller |