The PSC5425 combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery. The charging parameters and operating modes are programmable through an I2C interface that operates up to 400kbps. The charger circuits switch at 1..
tus is reported back to the host through the I2C port. The PSC5425 can operate as a boost regulator on command from the system. The boost regulator includes a soft-start that limits inrush current from the battery. The PSC5425 is available in a 2.04 x 2.0mm, 20-bump, 0.4mm pitch WLCSP package.
VAUX
VBUS CBUS
1μF
VBUS CMID 10μF PMID
SW BOOT
10KΩ 10KΩ 10KΩ
10KΩ
10KΩ
PSC5425 CSIN
SCL SDA STAT
VBAT VREF
OTG DISABLE
PGND
HOST
L1 Cboot
33nF
1μH RSNS
CCSIN
0.1μF
BATTERY CBAT
22μF
CREF
4.7μF
CCSOUT
0.1μF
Figure 1: Typical Application
Feature
Fully Integrated, High-Efficiency Char.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PSC5425A |
Prisemi |
USB-Compliant Single-Cell Li-lon Switching Charger | |
2 | PSC5415A |
Prisemi |
USB-Compliant Single-Cell Li-lon Switching Charger | |
3 | PSC5A10-7iR |
Power-One |
6...12 A Switching Regulators | |
4 | PSC5A10-7iR |
Power-One AG |
Positive Switching Regulators | |
5 | PSC5A10-7iR |
Melcher AG |
Positive Switching Regulators | |
6 | PSC5A11-2 |
Power-One |
6...12 A Switching Regulators | |
7 | PSC5A12-7iR |
Power-One |
6...12 A Switching Regulators | |
8 | PSC5A12-7iR |
Power-One AG |
Positive Switching Regulators | |
9 | PSC5A12-7iR |
Melcher AG |
Positive Switching Regulators | |
10 | PSC1065B1 |
nexperia |
10A SiC Schottky diode | |
11 | PSC1065B1-Q |
nexperia |
10A SiC Schottky diode | |
12 | PSC1065H |
nexperia |
10A SiC Schottky diode |