The PNX7100 is a single-chip MPEG-2 audio and video encoder and decoder with associated multiplexing and demultiplexing functionality, targeted for digital recording systems. The PNX7100 has a unified memory architecture that allows the MPEG subsystem, graphics and CPU to share the external SDRAM. External memory mapped peripherals can be connected to the PC.
Interfaces
• 32-bit 133 MHz SDRAM interface supports up to two 256 Mbit devices including one SyncFlash memory
• PCI-XIO extension bus interface supports PCI-bus (rev. 2.2) and 8-bit NAND or NOR flash
• 8 or 16-bit IDE interface ATA-4 (master)
• I2S-bus interface to basic engine (slave)
• Byte parallel MPEG TS output to IEEE 1394 link
interface
• Byte parallel MPEG TS or DV input from IEEE 1394 link interface
• Four DMA UARTs
• Two I2C-bus master or slave transceivers
• 32 GPIO pins
• RGB (YUV), YC and CVBS output (10-bit DAC) with
Macrovision copy protection
• SMPTE 293M progressive digital v.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PNX7850 |
Bexperia |
High Speed CD-RAM Processor | |
2 | PNX0101 |
Philips |
OPPO MP3 X9 Works | |
3 | PNX1300 |
Philips |
Media Processors | |
4 | PNX1301 |
Philips |
Media Processors | |
5 | PNX1302 |
Philips |
Media Processors | |
6 | PNX1311 |
Philips |
Media Processors | |
7 | PNX1500 |
NXP |
Connected Media Processor | |
8 | PNX1501 |
NXP |
Connected Media Processor | |
9 | PNX1502 |
NXP |
Connected Media Processor | |
10 | PNX1520 |
NXP |
Connected Media Processor | |
11 | PNX15xx |
NXP Semiconductors |
Connected Media Processor | |
12 | PNX1700 |
NXP |
Connected Media Processor |