The PI3A125 is a high-speed CMOS SPST switch that can be used in analog or low-delay bus switch applications. Specified over a wide operating power supply voltage range, 2.3V to 3.6V, the PI3A125 has a low maximum ON resistance of 10-ohm at 2.3V and 7 ohms at 3V. The CMOS device features rail-to-rail signal range. The switch is turned off when the OE input i.
• Low Voltage, SPST Switch
– VCC from 2.3V to 3.6V
• Low On-Resistance: 6 ohms at 3.0V
• CMOS Technology for Bus and Analog Applications
• Rail-to-Rail Signal Range
• Low Power: 30µW at 3.0V
• High Speed: 4ns
• High Off Isolation: 65dB at 1MHz
• High Bandwidth: 250MHz
• Extended Industrial Temperature Range: -40°C to 85°C
• Improved, Direct Replacement for SN74CBTLV1G125
• Packaging: - 5-pin SC70 (C) - 5-pin SOT-23 (T)
OE 1
Description
The PI3A125 is a high-speed CMOS SPST switch that can be used in analog or low-delay bus switch applications. Specified over a wide operating power supply volt.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PI3A125CX |
Pericom Semiconductor Corporation |
SOTINY Low Voltage SPST Analog Switch/Bus Switch | |
2 | PI3A125TX |
Pericom Semiconductor Corporation |
SOTINY Low Voltage SPST Analog Switch/Bus Switch | |
3 | PI3A114-A |
Pericom Semiconductor Corporation |
1:4 Mux/Demux | |
4 | PI3A212 |
Pericom Semiconductor Corporation |
Dual SPDT Analog Switch | |
5 | PI3A212S |
Pericom Semiconductor Corporation |
Dual SPDT Audio Clickless Analog Switch | |
6 | PI3A223 |
Pericom Semiconductor Corporation |
Dual SPDT | |
7 | PI3A223C |
Pericom Semiconductor Corporation |
Dual SPDT | |
8 | PI3A268C |
Pericom Semiconductor Corporation |
Dual SPDT | |
9 | PI3A268SC |
Pericom Semiconductor Corporation |
Dual SPDT | |
10 | PI3A3159 |
Pericom Semiconductor Corporation |
3.0V/ SOTiny 0.4 SPDT Analog Switch | |
11 | PI3A3159TEX |
Pericom Semiconductor Corporation |
3.0V/ SOTiny 0.4 SPDT Analog Switch | |
12 | PI3A3159TX |
Pericom Semiconductor Corporation |
3.0V/ SOTiny 0.4 SPDT Analog Switch |