The PHY1071-01 is a combined VCSEL driver and limiting amplifier with support for Digital Diagnostic Monitoring for use within small form f.
• Multi-rate from 125Mbps to 2.125Gbps
• VCSEL driver output stage with 16mA max
modulation drive and 20mA bias current
• Programmable mean power control loop
• Temperature compensated modulation current
• Integrated limiting amplifier with selectable
swing CML output to reduce radiated emissions
• Programmable receiver low pass filter
• Integrated Loss Of Signal function
• Digital diagnostic mode compliant with SFF-
8472 using an external MCU
• Stand-alone mode where device parameters
are loaded from an external EEPROM
• -40°C to +85°C operating range
• 36pin 6mm x 6mm QFN package
• Eye safet.
No. | Partie # | Fabricant | Description | Fiche Technique |
---|---|---|---|---|
1 | PHY11G |
Lantiq |
Single Port Gigabit Ethernet PHY | |
2 | PHY36XD |
Fiyada |
PWM controller | |
3 | PHY4943D |
ETC |
Power Supply Supervisor+PWM | |
4 | PHYTVS125V4 |
Protek Devices |
HYBRID TVS | |
5 | PHYTVS250V4 |
Protek Devices |
HYBRID TVS | |
6 | PHYTVS277V4 |
Protek Devices |
HYBRID TVS | |
7 | PH-100Q |
DB Lectro |
Resonant Frequency | |
8 | pH-Sensor |
Vernier |
pH Sensor | |
9 | PH0416NL |
Pulse |
HIGH ISOLATION POWER TRANSFORMER | |
10 | PH045NA-01B |
ETC |
LCD | |
11 | PH0801CNL |
Pulse |
HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS | |
12 | PH0802CNL |
Pulse |
HIGH FREQUENCY FLAT COIL PLANAR TRANSFORMERS |